X

Sliding Panel

Need something to give your website a bit more oomph? Then you're in the right place.

Product

LCR 500 Series Oil-Holding Filter Bag

Specifications

● Filter Media: Melt-blown polypropylene microfiber filter media provides high particle removal efficiency with broad chemical compatibility
● FDA compliant according to CFR Title 21
● Sealing Ring: Stainless steel and Polypropylene ring available


Download   Back
Line分享

The LCR 500 Series filter bag uses the patented bypass and transport layer design that maximizes the particle containment and surface area of each filter.
This range has a complex arrangement of final filter layers, allowing the removal of difficult-to-filter gels and deformable particles with a high dirt-holding capacity. Compared to a normal filter bag with 4.4 square feet (0.41 m²) area. The LCR 500 series filter bag can reach 38 square feet (3.53 m²)

 

 

Applications (Pre-filtration or Final filtration)

Acids and bases/Amines/Carbon Beds/Makeup Water/Deep Wells/Desalination/DI Resins/Glycol/Organic Solvents/Groundwater Cleanup/Machine Coolants/Completion Fluids/Photo Chemicals/Plating Solutions/RO Membranes/Storm Water /Waste Water /Flood Water

Initial Pressure Drop

Initial Pressure Drop

Particle Removal Efficiency

Particle Removal Efficiency

Loading: Loading capacity is extremely high due to the large amount of surface area available. The data above shows typical loading capacities of the different micron-rated filters. Loading capacity is determined by challenging a filter with a dispersion of silica test dust in water at the recommended flow rate. Pressure drop is monitored and testing is terminated at 35 psid (2.4 bar). The loading capacity reported is the dry weight gain of the bag.

Operating Conditions

Operating Conditions

◇Max. operating temperature: 82°C/ 180°F
◇Recommended water flow rate : 25 gpm (5.7 m3/hr)
◇Suggested Max. water flow: 50 gpm (11 m3/hr)
◇Suggested Max. differential pressure: 35 psid (2.4 bar)

Product Code